Bizerba GLP 80 - Page 86

Display and operation
Operating instructions GLP
1 -- 66
6.562.98.5.01.18
Character set
Several character sets for different installation countries are stored on the device.
An overview at the end of section 2.1 of the programming instructions shows
which character set must be set for which country. Furthermore, it comprises an
overview of the characters of the respective character sets.
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
[SECOND] [MODE]
20 Operating
GT--CT
Languages+
character
Character
set
Call up the selection menu
Western
Europe
Activate the character set ’Western Europe’.
Cyrillic
Activate the character set ’Cyrillic’.
Eastern
Europe
Activate the character set ’Eastern Europe’.
Greek
Activate the character set ’Greek’.
East 2
Activate the character set ’East 2’.
1.4.10.7 Menu path display
For checking or information purposes, the designations of the submenus are indi-
cated in a path display above the softkeys. The display may be activated or deacti-
vated as required.
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
[SECOND] [MODE]
20 Operating
GT--CT
-- Call up GT--CT mode level 1
Menu path
display
W/o With
Preselect ’W/o’ or ’With’ menu path display.
Standard: With
1.4