Display and operation
Operating instructions GLP
1 -- 68
6.562.98.5.01.18
1.4.11 Presettings for display--operating GT--CT unit at mode level 2
1.4.11.1
Languages + characters
Operator language
The selection of the operator language is described on page 1 -- 65.
Keyboard layout
The selection of the keyboard layout is described on page 1 -- 65.
Character set
The selection of the character set is described on page 1 -- 66.
1.4.11.2
Display
Text display
The text selected (see above) may be presented in the standard or the original
version. The relevant setting can be made here.
Standard representation: text left--justified in a fixed character size.
Original representation: text according to justification and character size.
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
[SECOND] [MODE]
20 Operating
GT--CT
[MODE] 2
Display Text
display
Call up the se-
lection menu
Select.
represent.
Orig.-Std.
Set whether the article text is to be displayed in the standard or the
original version.
Standard setting: Standard
1st total window
The presetting is described on page 1 -- 62.
2nd total window
The presetting is described on page 1 -- 63.
3rd total window
The presetting is described on page 1 -- 64.
Menu path display
The presetting is described in section 1.4.10.7 on page 1 -- 66.
History of messages
The display of the history is described in section 3.12.2 on page 3 -- 168.
Display connection
The presetting is described in section 1.4.9.2 on page 1 -- 58.
Enlarged view
The presetting is described in section 1.4.10.8 on page 1 -- 67.
1.4
To Next Page
Loading...
