Display and operation
Operating instructions GLP
1 -- 69
6.562.98.5.01.18
1.4.11.3
Deviating print for service printouts
The static evaluation, service printouts etc. can be printed or transmitted via eSer-
vice. Here you may select one or the other.
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
[SECOND] [MODE]
20 Operating
GT--CT
-- Call up GT--CT display
[MODE] 2
Deviat.print
service pr.
-- Call up pre--setting for print deviation in mode level 2
Label
printer
Make this setting if the service printout is to be made on labels by
means of the integrated label printer (default setting).
List print.
interface
Make this setting if the service printout is to be made on lists on
a connected list printer.
Only
e--service
Make this setting if the service printouts e.g. are directly to be
transmitted to the Bizerba service via eservice.
1.4
To Next Page
Loading...
