Do you have a question about the Black & Decker 11BLE-325 and is the answer not in the manual?
Model | 11BLE-325 |
---|---|
Category | Pressure Washer |
Brand | Black & Decker |
Power Source | Electric |
Motor | Universal Motor |
Attaching the carry handle and removing the shipping plug.
Connecting the high-pressure and garden hoses to the unit.
Attaching the spray lance and connecting the GFCI.
Releasing air and turning the unit on.
Explains DANGER, WARNING, CAUTION, NOTICE symbols.
California Prop 65 warning regarding chemicals.
Lists initial safety precautions for operation.
Continues comprehensive safety rules for operation and use.
Describes unit protection features against overload and trigger release.
Explanation of GFCI for electrical shock prevention.
Guidelines for servicing double-insulated products.
Details electrical voltage, frequency, and circuit needs.
Step-by-step guide to test the GFCI before each use.
Recommendations for selecting and using extension cords.
Labels for gun, lance, hoses, and controls.
Locating storage, water inlet, and filter screen.
Instructions for carry handle and shipping plug.
Definitions of PSI, GPM, CU, and operational terms.
Requirements for water supply and spray injection risks.
Describes Click-N-Clean® and Powerswivel® wand patterns.
Best practices for applying cleaning solutions.
Filling and flushing the detergent tank.
How detergent enhances cleaning effectiveness.
Warnings and initial steps for starting operation.
Connecting hoses and plugging in GFCI.
Releasing air and turning the unit on.
Cleaning nozzles and lubricating hose connections.
Permanent lubrication and water screen filter care.
Ensuring proper air circulation for the motor.
Proper storage environment and temperature guidelines.
Steps for draining, rinsing, and disconnecting.
Risks associated with non-specified accessories.
Model, pressure, flow, electrical data.
Inlet water pressure and soap consumption rate.
What is covered, not covered, and conditions.
Duration and limitations of implied warranties.
Solutions for detergent not dispensing.
Problems with detergent ratio and electrical trips.
GFCI errors and water leaks.
Issues with pressure or surging water.
No water or unresponsive trigger.
Unit won't start or motor stops.
Procedure for securely attaching the lance.
Procedure for safely detaching the lance.