Need help?Do you have a question about the Black & Decker 7715 and is the answer not in the manual?
General| Brand | Black & Decker |
|---|---|
| Model | 7715 |
| Category | Saw |
| Language | English |
Essential safety guidelines for operating power tools, covering guards, work area, attire, and electrical safety.
Specific safety instructions for the power miter saw, including electrical, blade, and operational guidelines.
Guidance on selecting and using extension cords for safe and effective power tool operation, including wire size.
Details on connecting the saw to power, voltage requirements, and the safety features of double-insulated tools.
Lists the components included in the saw's packaging, referring to a figure for visual identification.
Familiarizing the user with the miter saw's terminology and parts through diagrams.
Instructions on how to unlock the saw's pivot arm from its shipping position for use.
Steps for removing the blade guard and preparing for blade installation.
Adjusting the upper pivot bolt to control arm motion and counter balance spring tension.
Adjusting the lower pivot bolt for miter arm rotation and installing the clamp knob.
Detailed steps to ensure the saw blade is square to the table top using test pieces and screws.
Instructions for adjusting table mounting screws to ensure the table top is square to the saw's fence.
Procedures to align the saw blade precisely square to the fence using a carpenter's square.
Steps to precisely set the miter pointer to the zero position on the miter scale for accurate angle settings.
Instructions for securely mounting the miter saw to a workbench for stability and safety.
Step-by-step guide on setting the miter arm to a desired angle using the miter scale and pointer.
Guidance on cutting clearance slots (kerfs) into the saw table for specific miter angles.
Detailed instructions on how to safely and accurately cut wood pieces using the miter saw.
Tips for achieving smooth cuts, considering material, blade type, sharpness, and cutting rate.
Instructions for creating and using custom spacers to improve efficiency when cutting molding.
Method for increasing the saw's cutting capacity for wider pieces using a spacer.
A list of available saw blades, including their specifications and intended uses.
Lists additional recommended accessories such as a tool stand and protective eyewear.
Information regarding the saw's lubrication, stating permanent lubrication and advising against self-repair.
Outlines the terms of the two-year limited warranty, covering defects in material and workmanship.
To Next Page