Need help?Do you have a question about the Black & Decker 7770/3427 and is the answer not in the manual?
General| Brand | Black & Decker |
|---|---|
| Model | 7770/3427 |
| Category | Saw |
| Language | English |
This booklet provides information on the use and care of your new DeWalt Saw.
Identifies the specific model, type, and bulletin number of the radial arm saw.
Guidance on unpacking and preparing the radial arm saw for initial setup.
Detailed steps for initial assembly, from removing components to fitting the table top.
Instructions for safely connecting the saw to a power source and essential grounding information.
Key points for securing the machine and preparing for initial cuts, including fence positioning.
Essential safety guidelines to prevent accidents and ensure safe operation of power tools.
Recommended maintenance practices and information on the motor overload protection system.
Identification and explanation of the major controls and parts of the radial arm saw.
Procedures for adjusting the yoke clamp and bevel clamp handles for proper operation.
Adjusting rollerhead bearings and ensuring the arm fits snugly on the column.
Adjustments for the arm clamp, belt tension, and base rotation to ensure stability.
Ensuring table top parallelism, adjusting board clamps, and setting blade perpendicularity.
Adjusting the bevel scale, cross-cut travel, and miter pointer for accurate cuts.
Detailed steps for safely removing the arbor nut, including methods for tight nuts.
To Next Page