Need help?Do you have a question about the Black & Decker 7700 and is the answer not in the manual?
General| Type | Circular Saw |
|---|---|
| Power Source | Corded Electric |
| Voltage | 120 V |
| No Load Speed | 5300 rpm |
| Blade Diameter | 7-1/4 inches |
| Arbor Size | 5/8 inches |
| Depth of Cut at 45 degrees | 1-3/4 inches |
Ensures the saw base is snug around the arm for stability.
Aligns the table parallel to the arm for consistent cut depth.
Sets the saw arm perpendicular to the fence for square cuts.
Calibrates the miter scale for accurate angle cuts.
Ensures the blade is at a 90° angle to the table surface.
Aligns the saw blade parallel to arm tracks and fence for ripping.
To Next Page