Black & Decker 7962 User Manual

Keep work area clean and well lit to prevent accidents.

Avoid using power tools in rain or damp locations and ensure good lighting.

Keep children and visitors at a safe distance from the work area.

Store idle tools in a dry, high, or locked-up place out of reach of children.

Use the tool at its designed rate for better and safer performance.

Select the correct tool for the job to avoid damage or injury.

Avoid loose clothing or jewelry that can get caught in moving parts.

Wear safety glasses and a dust mask if necessary for protection.

Protect the cord from heat, oil, and sharp edges; do not yank it.

Use clamps or a vise to hold work securely for safer operation.

Maintain proper footing and balance at all times to avoid accidents.

Keep tools sharp, clean, and lubricated for best performance.

Disconnect tools before servicing or changing accessories.

Always remove adjusting keys and wrenches before turning on the tool.

Ensure the switch is off before plugging in and keep finger off the switch.

Use only outdoor-suitable extension cords for outdoor use.

Avoid operating tools in explosive atmospheres due to sparking.

Always wear eye protection when operating the polisher.

Use a dust mask when sanding for respiratory protection.

Ensure the pad can revolve freely before turning the tool on.

Prevent cord entanglement with the rotating disc; unplug if damaged.

Do not use damaged or torn discs or bonnets for safety.

Wear appropriate clothing, avoiding loose items that could snag.

Avoid over-reaching and operate with both hands for better control.

Exercise caution when polishing around sharp car body features.

How to attach the wool-blend and foam bonnets to the polisher head.

Wash and prepare the car surface before polishing for best results.

Apply liquid polish with a foam bonnet, moving tool evenly.

Use a clean foam bonnet to remove dried polish residue.

Use a wool-blend bonnet for a final, lustrous finish.

Use porous foam bonnet for paste wax application and removal.

Procedure for attaching adhesive-backed abrasive discs for sanding.

How to operate the tool for sanding, including pressure and movement.