What to do if my Black & Decker BDEMS600 is not collecting dust?
If the Black & Decker Sander isn't collecting dust, make sure you're using Mouse sandpaper with the correct hole configuration to ensure proper alignment. Also, check the dust canister; if it's full, separate it and gently shake or tap to empty it.
Why my Black & Decker BDEMS600 won't start?
If your Black & Decker Sander won't start, first ensure the cord is properly plugged into a working outlet. If it still doesn't start, check the circuit fuse and replace it if blown. If the fuse repeatedly blows, or the circuit breaker trips, discontinue use and have it serviced by a BLACK+DECKER service center or authorized servicer. A damaged cord or switch can also prevent starting; have these components replaced by qualified personnel.
What to do if my Black & Decker Sander will not start?
If your Black & Decker Sander isn't starting, there are several potential causes. First, make sure the cord is properly plugged into a working outlet. If it is, check your circuit fuse and replace it if it's blown. Also, check if the circuit breaker has tripped and reset it if necessary. If none of these steps work, the cord or switch might be damaged, and you should have it replaced at a Black+Decker Service Center or Authorized Servicer.
Why is my Black & Decker BDEMS600 Sander not collecting dust?
If your Black & Decker sander isn't collecting dust, the dust canister might be full. Separate the dust canister and gently shake or tap to empty it. Also, ensure you are using Mouse[® ]sandpaper with the appropriate hole configuration.
General| Amperage | 2.0 Amps |
|---|---|
| Dust Collection | Yes |
| Dust Extraction | Yes |
| Weight | 3.5 lbs |
| Cable Length | 6 ft |
| Power Source | Corded Electric |
| Power | 240 Watts |
| Orbit Diameter | 3/32 inch |
Explains safety alert symbols and words used in the manual.
Guidelines for safe work environment, electrical precautions, and user alertness.
Instructions on proper tool operation, maintenance, and qualified repairs.
Safety warnings for sander use, lead paint, and dust control.
Measures to minimize dust, protect the environment, and clean the work area.
Information on motor, cord safety, and identification of tool parts.
Specifies product application and critical warnings before operation.
Instructions for switch operation, detail attachment, and dust collection system.
Tips for best results, cleaning, and information on repairs.
Details on available accessories and important compatibility warnings.
Solutions for common problems like unit not starting or dust collection failure.
To Next Page