Black & Decker 900142 User Manual

Model # 900142: Page 1
Bottom Loading
Bottled Water Dispenser
Model # 900142
USER MANUAL
PN O-012B © 2008 Primo Water Corporation
TO REDUCE THE RISK OF INJURY AND
PROPERTY DAMAGE, USER MUST READ
THIS MANUAL BEFORE ASSEMBLING,
INSTALLING & OPERATING DISPENSER.
SAVE THIS MANUAL FOR
FUTURE USE

Black & Decker 900142 Specifications

General

Brand	Black & Decker
Model	900142
Category	Water Dispenser
Language	English

Summary

Safety Precautions

Key Information for Future Use

Specifications

Parts & Features

Assembly

Installation

Operation

Initial Set Up

Steps for setting up the water dispenser, including bottle probe and energy saving switch.

Initial Rinsing of Water Lines

Instructions for rinsing the water lines after initial setup to remove dust and odors.

Setting Clock

Guide to setting the digital clock on the dispenser using mode and set buttons.

Setting Hot Water Temperature

Instructions for adjusting the desired hot water temperature range.

Setting Cold Water Temperature

Instructions for adjusting the desired cold water temperature range.

Blinking Cup & Glass Indicators

Explanation of the display indicators for heating, cooling, and rest states.

Dispensing Cold Water

Procedure for dispensing cold water, including tap operation and alignment.

Dispensing Hot Water

Procedure for dispensing hot water, including safety precautions and tap operation.

Replacing an Empty Bottle

Steps to follow when the water bottle is empty and needs replacement.

Proper Care & Cleaning

General Cleaning

Guidelines for routine cleaning of dispenser surfaces, drip tray, and back.

Cleaning Water Tanks and Lines

Detailed steps for periodic cleaning and sanitization of internal water tanks and lines.

Troubleshooting

Limited Warranty