Black & Decker 900144 User Manual

Model # 900144: Page 1
Bottled Water Dispenser
Model # 900144
PN O-013B © 2007 Primo Water Corporation
USER
M
TO REDUCE THE RISK OF INJURY AND
PROPERTY DAMAGE, USER MUST READ
THIS MANUAL BEFORE ASSEMBLING,
INSTALLING & OPERATING DISPENSER.
SAVE THIS MANUAL FOR
FUTURE USE
USER MANUAL

Black & Decker 900144 Specifications

General

Brand	Black & Decker
Model	900144
Power Source	Electric
Water Temperature	Hot and Cold
Color	Black

Summary

Safety Precautions

General Safety Warnings

Read manual before assembly, installation, and operation to reduce risk of injury.

Key Information for Future Use

Recording Warranty Information

Record serial number and date for warranty service and future support.

Specifications

Parts & Features

Assembly

Base Attachment and Tray Insertion

Securely attach the base and insert the drip tray as per instructions.

Installation

Wall Mount Strap Installation

Install the wall mount strap to prevent accidental tip-over for safety.

Operation

Initial Setup and Rinsing

Allow unit to sit upright for 4 hours, clean bottle cap, and rinse lines before use.

Dispensing Cold Water

Position container, depress cold water control to dispense water.

Dispensing Hot Water

Replacing an Empty Bottle

Proper Care & Cleaning

General Cleaning

Clean surfaces, drip tray, and back of dispenser with soap and water.

Cleaning Water Lines and Reservoirs

Clean reservoirs and lines every 3 months or for off-tastes using bleach solution.

Troubleshooting

Limited Warranty