may be required. Please check with the retailer for its
specific return policy regarding time limits for returns
or exchanges. The second option is to take or send
the product (prepaid) to a Black+Decker owned or
authorized Service Center for repair or replacement
at Black+Decker’s option. Proof of purchase may be
required. Black+Decker owned and authorized service
centers are listed online at www.blackanddecker.com.
This warranty does not apply to accessories. This
warranty gives you specific legal rights and you may
have other rights which vary from state to state. Should
you have any questions, contact the manager of your
nearest Black+Decker Service Center. This product is
not intended for commercial use, and accordingly, such
commercial use of this product will void this warranty.
All other guarantees, express or implied, are hereby
disclaimed.
LATIN AMERICA: This warranty does not apply to
products sold in Latin America. For products sold
in Latin America, check country specific warranty
information contained in the packaging, call the local
company or see the website for such information.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
• Unit will not start. • Battery not installed properly. • Check battery installation.
• Battery not charged. • Check battery charging requirements.
• Battery will not charge. •
Battery not inserted into charger
. • Insert battery intocharger until green
LED appears.
• Charger not plugged in. • Plug charger into a working outlet.
Refer to “Important Charging Notes”
for more details.
• Check current at receptacle by
plugging in a lamp or other appliance.
• Check to see if receptacle is
connected to a light switch which
turns power off when you
turn out the lights.
• Surrounding air tempera- •
Move charger and tool to a surrounding
ture too hot or too cold. air temperature of above 40 degree F
(4.5°C) or below 105 degree F (+40.5°C).
• Dust is not • Sandpaper holes do not align. • Use Mouse
®
sandpaper with the
being collected. appropriate hole configuration.
• Dust canister is full. • Separate dust canister and gently
shake or tap to empty.
For assistance with your product, visit our website www.blackanddecker.com for the
location of the service center nearest you or call the
BLACK+DECKER
help line at
1-800-544-6986.
11
Application / Accessory Matrix
ACCESSORY RECOMMENDED APPLICATIONS / USES
MediuM grit sandpaper paint, Varnish, rust reMoVal
Fine grit sandpaper surFace blending and Finishing
extra Fine grit sandpaper sanding between coats oF paint or Varnish
detail sanding tips corners / hard to reach places
1 ot polishing / stripping wool polishing Metals / stripping Varnish or urethane
4 ot Fine polishing wool Fine polishing, satin Finish on paint / Varnish / urethane
grey FoaM pad applying and reMoVing polish
white
non-woVen pad light scrubbing
red
non-woVen pad heaVy scrubbing / rust reMoVal
The pads described above may be available in kits where Mouse
®
products are sold. For more information call 1-800-544-6986.
Imported by
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
To Next Page
Loading...
Need help?
General
