To Next Page
M
Margaret HorneJul 29, 2025
How to fix Black & Decker Power Screwdriver battery not charging?
- Ttammy97Jul 30, 2025
If the battery of your Black & Decker Power Screwdriver will not charge, ensure that the jack plug is properly inserted into the charge port. Also, verify that the charger is plugged into a working outlet. Refer to "Important charging notes" for more details. Finally, the surrounding air temperature might be too hot or too cold. Move the charger and battery pack to a location where the surrounding air temperature is above 40 degrees F (4,5°C) or below 105 degrees F (+40,5°C).
General
