6
DUST COLLECTION (FIGURE E)
WARNING: Collected sanding dust from
sanding surface coatings (polyurethane,
linseed oil, etc.) can self-ignite in sander
dust bag or elsewhere and cause fire. To
reduce risk, empty bag frequently and
strictly follow sander manual and coating
manufacturer’s instructions.
Your sander comes equipped with a cloth
while sanding.
is on the top side of the port.
turn the canister clockwise to lock it in
place .
counterclockwise and slide the canister off.
dust port and dump the sanding debris
into an appropriate trash receptacle.
MAINTENANCE
Use only mild soap and damp cloth to clean
never immerse any part of the tool into a liquid.
IMPORTANT: To assure product SAFETY
and RELIABILITY, repairs, maintenance
and adjustment should be performed by
authorized service centers or other qualified
service organizations, always using
identical replacement parts.
ACCESSORIES
WARNING: The use of any accessory
not recommended for use with this tool
could be hazardous.
E
7
8
6
To Next Page
Loading...
Need help?
General
