To Next PageTo Next Page
Need help?Do you have a question about the Black & Decker BDL170 and is the answer not in the manual?
General| Laser Color | Red |
|---|---|
| Indoor Visibility Range | 50 ft |
| Power Source | Battery |
| Batteries Included | Yes |
| Battery Type | AA |
| Number of Batteries Required | 2 |
| Laser Class | Class II |
| Laser Wavelength | 635 nm |
| Accuracy | +/- 3/16" @ 30 ft |
| Self-Leveling Range | ±4 degrees |
| Leveling Range | 4 ° |
| Mounting Type | Tripod mount |
Avoid direct eye exposure to laser beam; serious eye injury can result.
Performing procedures not specified may result in hazardous laser radiation exposure.
Exercise caution with electrical wiring, use correct batteries, and keep away from untrained users.
Insert 2 AAA batteries, matching polarity (+/-) correctly, to power the laser unit.
Lists and describes key components like the actuator, protractor, and mounting attachments.
Explains how to hang the unit using screws or drywall pins.
Slide actuator to middle for locked, right for self-leveling, left for off.
Measure and transfer angles; protractor backlight activates for use.
Activate the self-leveling feature by sliding the ON/OFF actuator fully to the right.
Use side buttons to project laser level left, plumb up, or level right.
Proper storage and cleaning methods to ensure tool longevity and safety.
Details on recommended accessories and how to obtain service or repairs.
Addresses issues like laser not projecting or lines not being level.
Lists key technical details including wavelength, range, accuracy, and operating temperature.
