Do you have a question about the Black & Decker BDL310S and is the answer not in the manual?
Contact 1-800-54-HOW-TO for assistance with product issues or suggestions.
Keep this manual for future use and reference.
Avoid direct eye exposure to prevent serious eye injury.
Follow all instructions to avoid shock, fire, or injury.
Information on understanding tool labels and symbols on the device.
Securing the mounting bracket to a vertical surface using pins or screws.
Procedure for inserting the battery and replacing the compartment cover.
Adjusting horizontal and vertical laser lines using control knobs.
How to hang the laser from a secure structure using a strap.
Operating the laser for level, plumb, or crosshair lines.
Understanding how indicators show the unit is out of auto-leveling range.
Guidelines for storing the laser and performing basic cleaning.
Information on recommended accessories and authorized service centers.
Explains product warranty against defects in material or workmanship.
Contact 1-800-54-HOW-TO for assistance with product issues or suggestions.
Keep this manual for future use and reference.
Avoid direct eye exposure to prevent serious eye injury.
Follow all instructions to avoid shock, fire, or injury.
Information on understanding tool labels and symbols on the device.
Securing the mounting bracket to a vertical surface using pins or screws.
Procedure for inserting the battery and replacing the compartment cover.
Adjusting horizontal and vertical laser lines using control knobs.
How to hang the laser from a secure structure using a strap.
Operating the laser for level, plumb, or crosshair lines.
Understanding how indicators show the unit is out of auto-leveling range.
Guidelines for storing the laser and performing basic cleaning.
Information on recommended accessories and authorized service centers.
Explains product warranty against defects in material or workmanship.
| Brand | Black & Decker |
|---|---|
| Model | BDL310S |
| Category | Laser Level |
| Language | English |












Loading...