Black & Decker BDL250S - User Manual

WARNING: Read and understand all instructions. Failure to follow all instructions
listed below may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
Safety Instructions
• Do not operate the laser in explosive atmospheres, such as in the presence of flammable
liquids, gases, or dust.
• Use the laser only with the specifically designated batteries. Use of any other batteries
may create a risk of fire.
• Store idle laser out of reach of children and other untrained persons. Lasers are dangerous
in the hands of untrained users.
• Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one laser, may create a risk of injury when used on
another laser.
• Do not use optical tools such as a telescope or transit to view the laser beam. Serious eye
injury could result.
• Do not place the laser in a position which may cause anyone to intentionally or
unintentionally stare into the laser beam. Serious eye injury could result.
• Turn the laser off when it is not in use. Leaving the laser on increases the risk of staring
into the laser beam.
• Repairs and servicing MUST be performed by a qualified repair facility. Repairs performed
by unqualified personnel could result in serious injury.
• WARNING: DO NOT DISASSEMBLE THE LASER. There are no user serviceable
parts inside. Disassembling the Laser will void all warranties on the product. Do not modify
the product in any way. Modifying the tool may result in Hazardous Laser Radiation
Exposure.
• Do not operate the laser around children or allow children to operate the laser. Serious eye
injury may result.
• Do not remove or deface warning labels. Removing labels increases the risk of exposure
to radiation.
• Position the laser securely. Damage to the laser or serious injury could result if the laser
falls.
• CAUTION: Use caution when drilling, nailing or cutting into walls, floors and ceilings
which may contain electrical wiring or pipes. Always turn off the power when working
near electrical wires.
CAUTION: Use of controls or adjustments or performance of procedures other than
those specified in this manual may result in hazardous laser radiation exposure.
The label on your tool may include the following symbols.
V ..........................volts mW......................milliwatts
nm ........................wavelength in nanometers IIIa ......................Class IIIa Laser
For your convenience and safety, the following labels are on your laser.
VEA EL ESPAÑOL EN LA CONTRAPORTADA.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
INSTRUCTION MANUAL
LL
LL
aa
aa
ss
ss
ee
ee
rr
rr
LL
LL
ee
ee
vv
vv
ee
ee
ll
ll
Cat No. BDL250S Form #620407-00 (SEP-03) Copyright © 2003 Black & Decker Printed in Taiwan
FEATURES
A.) LASER
B.) MAGNETIC LINE LENS
C.) FIXED FOOT (RIGHT)
D.) ADJUSTABLE FOOT
(LEFT)
E.) HOOK AND LOOP
STRAP (2)
F.) AA ALKALINE
BATTERIES (3)
2
A
B
C
E
F
BEFORE RETURNING THIS PRODUCT
FOR ANY REASON PLEASE CALL
1-800-544-6986
IF YOU SHOULD HAVE A QUESTION OR EXPERIENCE A
PROBLEM WITH YOUR BLACK & DECKER PRODUCT,
CALL 1-800-544-6986
BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION AVAILABLE, CATALOG No., TYPE No., AND
DATE CODE (e.g. 20000130M). IN MOST CASES, A BLACK & DECKER REPRESENTATIVE CAN
RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU HAVE ASUGGESTION OR COMMENT, GIVE
US A CALL. YOUR FEEDBACK IS VITAL TO BLACK & DECKER.
D
Catalog No. BDL250S
1
0.87” (22mm)
PRESS - ENFONCER - PRESIONE
4
3
5
6
7
8
Applications - Applications Aplicaciones
Piping-ferrous sur Piping-non ferrous Door framing Tiling-vertical line Tiling-horizontal
faces surfaces line
Tubes – Tubes – surfaces non Cadres de Carrelages – Carrelages –
surfaces ferreuses ferreuses porte trait vertical trait horizontal
Cañerías – superficies Cañerías – superficies Enmarcado de Instalación de Instalación de –
ferrosas no ferrosas puertas azulejos línea azulejos – línea
vertical horizontal

Summary

Safety Instructions

Features

A.) LASER

Describes the laser component of the Black & Decker Laser Level.

B.) MAGNETIC LINE LENS

Details the magnetic line lens feature for precise line generation.

C.) FIXED FOOT (RIGHT)

Describes the fixed foot component of the laser level.

D.) ADJUSTABLE FOOT (LEFT)

Describes the adjustable foot component of the laser level.

E.) HOOK AND LOOP STRAP (2)

Details the two hook and loop straps for securing the laser.

F.) AA ALKALINE BATTERIES (3)

Specifies the three AA alkaline batteries required for operation.

Installing the Battery

Operating Instructions

On;Off Switch

Instructions on how to turn the laser on and off.

Use With Magnetic Line Lens

Guidance on attaching and using the magnetic line lens.

Use With Fixed and Adjustable Feet

Instructions for leveling the laser using its feet.

Use With Hook and Loop Straps

Details on how to secure the laser using the hook and loop straps.

Use With Magnetic Base

Instructions for utilizing the laser's magnetic base.

Helpful Hints

Provides practical tips for laser operation and battery checks.

Maintenance

Guidance on cleaning and maintaining the laser tool.

Accessories

Information regarding recommended accessories for the tool.

Service Information

Details on obtaining service and support for the product.

Full Two-Year Home Use Warranty

Explains the terms and conditions of the two-year warranty.

Technical Specifications

Black & Decker BDL250S Specifications

General

Laser Color	Red
Laser Class	Class II
Leveling Range/Self-Leveling Range	± 4 degrees
Power Source	Battery
Batteries Included	Yes
Battery Type	AA
Number of Batteries	2
Battery Life	Up to 20 hours
Mounting	Yes
Type	Laser Level
Laser Type	Dot
Range/Working Range	30 ft
Mounting Options	Magnetic, Tripod
Color	Black/Orange