EasyManua.ls Logo

Black & Decker BDXTTSM1 - Important Safety Instructions

Black & Decker BDXTTSM1
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ii
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock,
fire and/or serious injury.
WARNING: Never modify this product. Damage or personal injury could
result.
WARNING:
• Follow all applicable electrical codes and regulations regarding the
installation or replacement of a thermostat in the local jurisdiction.
In the absence of local requirements, follow ANSI/NFPA 70, National
Electric Code. In some cases, an authorized installer may be required.
Consult a qualified electrician or HVAC technician with any questions
about the installation of this product.
• DO NOT connect any of the terminals to voltage above 30 VAC.
The Thermostat uses 24 VAC nominal power.
• DO NOT cover any of the vents on the thermostat.
• DO NOT install this unit at an altitude of over 6550 feet (2000 meters).
• DO NOT install this unit in a bathroom or area of excessive moisture.
• DO NOT allow the unit to get wet. This temperature control device is
intended only for dry, closed living and oce spaces.
• DO NOT expose this device to temperatures below 14°F (-10°C) or
above 140°F (60°C).
• DO NOT operate or store this thermostat in areas where the relative
humidity exceeds 90%.
• DO NOT expose the unit to voltage fluctuations more than +/- 10%.
• DO NOT use solvents or aggressive cleaning agents. A dry, soft cloth is
recommended.
The manufacturer does not accept responsibility for any damage caused by
not following these instructions.