This document describes the BLACK+DECKER Desktop Heater, model number BHD101*. It is an instruction manual providing safety information, setup and usage instructions, maintenance guidelines, and warranty details for the device.
Function Description
The BLACK+DECKER Desktop Heater is designed to provide supplemental heating for indoor spaces. It operates by drawing in air, heating it using internal elements, and then circulating the warm air into the room. The heater features adjustable heat settings and a thermostat to maintain a desired temperature.
Important Technical Specifications
- Voltage: 120V, 60Hz
- Power Consumption: 1500W
- Unit Size (WxDxH): 5.3" x 8.5" x 9.4"
- Heat Settings: LOW (750 watts) and HIGH (1500 watts), plus a FAN ONLY setting.
- Current Draw: 12.5 amps during operation.
Usage Features
The heater is designed for ease of use with several key features:
- Adjustable Thermostat: Allows users to set and maintain a desired room temperature. The heater will cycle on and off automatically to regulate the temperature. To increase the temperature setting, turn the thermostat knob clockwise.
- Fan/Heat Settings: A control knob allows selection between OFF, FAN ONLY (*), LOW (LO) (750 watts), and HIGH (HI) (1500 watts) modes. The power indicator light illuminates when any of the FAN, LOW, or HIGH settings are selected.
- Power On Indicator Light: Provides a visual indication when the heater is operating.
- Tip-Over Safety Feature: An internal switch automatically shuts off the heater if it is tipped over. The heater will reset once restored to an upright position, and operation can be resumed by turning the heater back on.
- Overheat Safety Feature: If the internal components reach a temperature that could cause overheating or fire, the heater will automatically shut off. In such an event, users are advised to contact customer service.
- Polarized Plug: The appliance is equipped with a polarized plug (one blade wider than the other) to reduce the risk of electric shock. It is intended to fit into a polarized outlet only one way. Users are cautioned against modifying the plug or using it with an extension cord or relocatable power tap.
- Placement: The heater should be placed on a firm, level surface and operated only in an upright position.
- Combustible Materials: Maintain a minimum distance of 3 feet (0.9m) between the front of the heater and combustible materials such as furniture, pillows, bedding, papers, clothes, and curtains. Keep such materials away from the sides and rear as well.
- Circuit Overload Prevention: Due to its 12.5 amp draw, the heater should not be plugged into a circuit that is already powering other appliances to prevent overloading.
- Unattended Operation: The manual explicitly warns against leaving the heater on unattended.
Maintenance Features
Regular maintenance is crucial for the safe and efficient operation of the heater:
- Cleaning Procedure:
- Turn off the power and unplug the unit.
- Allow the heater to cool completely.
- Clean the outer shell with a soft, damp cloth. A mild detergent can be used if necessary.
- After cleaning, dry the unit thoroughly with a soft cloth.
- Caution: Do not allow liquid to enter the heater.
- Caution: Do not use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes, as these can damage the surface.
- Caution: Do not immerse the heater in water.
- Ensure the unit is completely dry before subsequent use.
- Storage: When not in use, store the heater in a cool, dry location. To prevent dust and dirt buildup, it is recommended to repack the unit in its original packaging.
The manual emphasizes several critical safety instructions:
- Read all instructions before use.
- Heater surfaces can become hot; avoid direct skin contact. Use handles if provided when moving.
- Exercise extreme caution when used by or near children or invalids, or when left unattended.
- Always unplug the heater when not in use.
- Do not operate with a damaged cord, plug, or if the heater has malfunctioned, been dropped, or damaged.
- Not for outdoor use.
- Not intended for use in bathrooms, laundry areas, or similar wet indoor locations.
- Do not run the cord under carpeting or cover it with rugs. Route the cord away from traffic areas to prevent tripping.
- Do not insert foreign objects into ventilation or exhaust openings.
- Do not block air intakes or exhaust openings to prevent fire. Avoid using on soft surfaces where openings may become blocked.
- Do not use in areas where gasoline, paint, or flammable liquids are used or stored.
- Use only as described in the manual; other uses may cause fire, electric shock, or injury.
- The heater's output temperature can be intense enough to cause burns; not recommended for persons with reduced heat sensitivity.
- A loose fit between the outlet and plug can cause overheating of the plug. If this occurs, try a different outlet and have the original outlet inspected by a qualified electrician.
- In case of an overheat safety feature activation, contact customer service.
The manual also provides troubleshooting tips and details the limited warranty, which covers defects in material, parts, and workmanship for a period of 1 year (12 months) from the date of purchase. For service, customers are directed to contact W Appliance Co. at 844-299-0879.
To Next Page
Need help?
General
