9
• Waxing and dewaxing (eg. ski’s).
• Drying wet timber prior to filling.
• Shrinking PVC wrapping and insulation tubes.
• Thawing frozen pipes.
On medium heat (KX1683):
• Welding plastics.
• Bending plastic pipes and sheets.
• Loosening rusted or tightly fastened nuts and
metal screws.
On high heat (CD700, KX1600, KX1682, KX1683):
• Removal of paints and lacquers.
• Starting barbecues.
• Soldering plumbing joints.
ACCESSORIES
A9883 Glass protector
A9884 Spoon reflector
A9887 Cone nozzle
A9881 Fish tail
A9890 Kit which includes all of the above
CLEANING
Use only mild soap and a slightly damp cloth to clean
your heatgun. Many household cleaners contain
chemicals which could seriously damage the plastic.
Also, do not use petrol, turpentine, lacquer or paint
thinners or similar products. Never let any liquid get
inside the tool and never immerse any part of the tool
into liquid.
EC DECLARATION OF CONFORMITY
We declare that units: CD700, KX1600, KX1682, KX1683
conform to 89/392/EEC, 89/336/EEC, EN55014,
73/23/EEC, EN60555, EN55104, EN60355, EN61000
A weighted sound pressure 68dB (A)
A weighted sound power 81dB (A)
Hand/arm weighted vibration <2.5m/s
2
Brian Cooke - Director of Engineering
Black & Decker Ltd, Spennymoor, County Durham
DL16 6JG United Kingdom
The Black & Decker policy is one of continuous
improvement to our product and as such we reserve
the right to change the product specification without
prior notice.
ENGLISH
CD700 KX1600-1683 UK p01-16 15/3/00, 5:31 pm9
To Next Page
Loading...
