To Next PageTo Next PageWhat to do if my Black & Decker Blender is not blending properly?
If the mixture in your Black & Decker blender isn't blending properly, it could be due to not enough liquid or too much ice. To fix this: * Turn off the blender. * Use a rubber spatula to redistribute the food. * Add some liquid. * Pulse the mixture to help it blend.
Why is my Black & Decker Cyclone BLC18750DMSUC Blender leaking from the bottom?
If liquid is leaking from the bottom of your Black & Decker blender jar, the gasket might be missing or not properly in place. Ensure that the jar is assembled correctly, paying special attention to the gasket.
How to prevent herbs from sticking to the sides of my Black & Decker Cyclone BLC18750DMSUC Blender?
If herbs or bread are sticking to the sides of your Black & Decker blender and not getting chopped, it's likely because the blending jar, the food, or the blade isn't dry. Always ensure that the jar, blade, and food are dry before blending.
What to do if the jar bottom of my Black & Decker Blender won't come off?
If the jar bottom of your Black & Decker blender doesn't come off, a vacuum may have formed. Place the jar on the blender and turn it counterclockwise until the jar is released from the bottom.
Essential safety guidelines to follow when using the appliance.
Details on plug type, tamper-resistant screws, and electrical cord safety.
Explanation of the digital display, indicator lights, and control buttons on the panel.
Steps for unpacking, cleaning, and assembling the blender jar and base.
General| Material | Plastic |
|---|---|
| Blade Type | Stainless steel |
| Speed Settings | 3 |
| Color | Silver |
| Frequency | 60 Hz |
| Voltage | 120 Volts |
