EasyManua.ls Logo

Black & Decker EMax32s - User Manual

Black & Decker EMax32s
8 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
EMax32
EMax32s

Table of Contents

Questions and Answers

  • J
    Joshua ShawAug 1, 2025
    Why won't my Black & Decker EMax32s Lawn Mower start?
    • A
      Anthony AndersonAug 1, 2025
      If your Black & Decker Lawn Mower fails to operate, it could be due to several reasons. First, ensure that the power is turned on. If it is, check the fuse; a faulty or blown fuse will need to be replaced. Another possible cause is that the grass is too long, in which case you should increase the cutting height and move the mower to shorter grass to start. Lastly, the thermal cut out may have activated. If this is the case, allow the motor to cool down and increase the cutting height.
  • S
    Sarah BlackAug 15, 2025
    Why does my Black & Decker Lawn Mower leave a ragged finish?
    • R
      Rebecca JohnsonAug 15, 2025
      If your Black & Decker Lawn Mower leaves a ragged finish or the motor labours, there are several potential causes. One possibility is that the cutting height is set too low; try increasing it. Another reason could be that the cutting blade is blunt and needs replacement. Also, check the underside of the machine for clogs and clear them out as necessary, always wearing heavy-duty gloves. Finally, ensure the blade is fitted correctly; if it's upside down, refit it properly.

Summary

Intended Use

Assembly

Assembling the grass collection box

Assemble the grass box from three pieces, clipping the handle and securing the lid to the base.

Fitting the switchbox

Attach the switchbox to the handle, slide in the plastic cover, and secure with screws.

Fitting the lower handle

Insert the lower handles into the mower, press down, and secure with screws.

Mower Preparation and Operation

Final Assembly and Blade Replacement

Assemble upper handle, secure cable, fit grass box, and replace blade.

Mower Operation Guide

Covers height adjustment, switching, mowing, EdgeMax, emptying, storage, and carrying.

Troubleshooting and Hints

Guides on problem resolution and tips for optimum mowing results.

Technical Data

EC Declaration of Conformity

Black & Decker EMax32s Specifications

General IconGeneral
TypePush lawn mower
Cutting width320 mm
Cutting height20, 40, 60 mm
Cutting systemRotary blades
Recommended lawn area- m²
Maximum cutting height60 mm
Minimum cutting height20 mm
Grass collecting volume35 L
Power sourceAC
CordlessNo
Weight and Dimensions IconWeight and Dimensions
Weight- g

Related product manuals