EasyManua.ls Logo

Black & Decker EMax32 - User Manual

Black & Decker EMax32
20 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
EMax32
www.blackanddecker.com
2English
7
13

Table of Contents

Questions and Answers

  • F
    fpatelAug 5, 2025
    Why won't my Black & Decker EMax32 start?
    • A
      Ashley CarterAug 5, 2025
      If your Black & Decker Lawn Mower fails to operate, it could be due to several reasons. First, ensure that the power is turned on. If it is, check the fuse; a faulty or blown fuse will need to be replaced. Another possible cause is that the grass is too long, in which case you should increase the cutting height and move the mower to shorter grass to start. Lastly, the thermal cut out may have activated. If this is the case, allow the motor to cool down and increase the cutting height.
  • Y
    yrodriguezAug 17, 2025
    Why does my Black & Decker EMax32 leave a ragged finish?
    • J
      Justin GrahamAug 18, 2025
      If your Black & Decker Lawn Mower leaves a ragged finish or the motor labours, there are several potential causes. One possibility is that the cutting height is set too low; try increasing it. Another reason could be that the cutting blade is blunt and needs replacement. Also, check the underside of the machine for clogs and clear them out as necessary, always wearing heavy-duty gloves. Finally, ensure the blade is fitted correctly; if it's upside down, refit it properly.

Summary

Maintenance and Storage

Blade maintenance

Procedures for keeping the blade in good condition, including cleaning and inspection.

Assembly

Assembling the grass collection box

Step-by-step guide for putting together the grass collection box.

Fitting the switchbox

Instructions for attaching the switchbox to the handle.

Fitting the lower handle

How to attach the lower part of the handle to the mower.

Assembling the upper handle

Guide for connecting the upper handle section.

Replacing the Blade

Use

Guidance on operating the appliance at its own pace without overloading.

Adjusting the height of cut

How to change the cutting height of the mower.

Switching on and off

Procedures for starting and stopping the lawnmower.

Mowing

Recommendations for effective mowing techniques.

Black & Decker EMax32 Specifications

General IconGeneral
TypePush lawn mower
Cutting width320 mm
Cutting height20, 40, 60 mm
Cutting systemRotary blades
Recommended lawn area- m²
Maximum cutting height60 mm
Minimum cutting height20 mm
Grass collecting volume35 L
Power sourceAC
CordlessNo

Related product manuals