What to do if my Black & Decker fusionblade BL1800 Blender stops during blending?
If your Black & Decker Blender stops or goes into standby mode, it might be because the blending time has exceeded 2.5 minutes. To resolve this, re-select the appropriate speed setting to restart the blender.
Why is the LED blinking fast on my Black & Decker fusionblade BL1800?
If the LED on your Black & Decker Blender is blinking quickly, it indicates that the blender may have overheated or the button was held for longer than 30 seconds. To fix this, unplug the unit to reset it, and allow it to cool down for at least 20 minutes before using it again.
General| Blade Material | Stainless Steel |
|---|---|
| Speed Settings | 3 |
| Dishwasher Safe | Yes |
| Pulse Function | Yes |
| Blade Type | FusionBlade |
| Material | Plastic |
| Frequency | 60 Hz |
| Voltage | 120 Volts |
Secure the jar, add ingredients in order, and power on the blender before selecting speed.
Press the desired speed or program, then press STOP when the desired consistency is reached.
Turn off the blender, remove the jar from the base, and pour the contents.
Add ingredients in order, attach blade base, lock jar onto base, blend, and remove.
Switch lids and enjoy your smoothie at home or on the go.
Add dry ingredients, attach the GRAY GRIND base, lock jar, power on, and press STOP when complete.
Cut food into small pieces, scrape down sides for thick mixtures, and start blending at low speed.
Use short pulse bursts, never operate without the lid, and cool hot ingredients before blending.
Recipe details for a green smoothie using spinach, pineapple, mango, banana, and flax seeds.
Recipe details for a classic smoothie with orange juice, bananas, and strawberries.
To Next Page
