What to do if my Black & Decker Performance FusionBlade Blender is having difficulty blending?
If your Black & Decker Blender struggles to blend, it might be due to a mixture that's too thick or an air bubble. Turn the blender off, then use a rubber spatula to scrape down the sides of the jar, redistributing the mixture and pushing the food towards the blades. If necessary, add more liquid.
How to fix Black & Decker Blender when all LEDs are blinking?
If all the LEDs on your Black & Decker Blender are blinking quickly, it indicates that the blender has overheated or the button was held for longer than 30 seconds. To reset the unit, unplug it and allow it to cool for at least 20 minutes.
Why does my Black & Decker Performance FusionBlade Blender stop or go into STANDBY mode?
Your Black & Decker Blender may stop or enter STANDBY mode if the blending time exceeds 2.5 minutes. To resume, re-select the appropriate speed setting to start the blender.
Details on polarized plug and tamper-resistant screw for user safety.
Guidelines for safe use of the power supply cord and extension cords.
Initial steps before using the blender, including setup and registration.
Step-by-step guide on how to operate the blender for blending tasks.
Recommended sequence for adding ingredients for optimal blending results.
Description of pre-programmed cycles for various blending tasks.
Reference chart for blending functions, food types, and recommended speeds.
Practical advice and techniques for effective and safe blender use.
Common blender problems, their possible causes, and solutions.
Instructions for preparing various food items using the blender.
General| Blade Material | Stainless Steel |
|---|---|
| Blade Type | FusionBlade |
| Jar Material | Plastic |
| Speed Settings | 3 |
| Pulse Function | Yes |
| Capacity | 6 cups |
To Next Page