What to do if my Black & Decker fusionblade BL1800 Blender stops during blending?
If your Black & Decker Blender stops or goes into standby mode, it might be because the blending time has exceeded 2.5 minutes. To resolve this, re-select the appropriate speed setting to restart the blender.
Why is the LED blinking fast on my Black & Decker fusionblade BL1800?
If the LED on your Black & Decker Blender is blinking quickly, it indicates that the blender may have overheated or the button was held for longer than 30 seconds. To fix this, unplug the unit to reset it, and allow it to cool down for at least 20 minutes before using it again.
General| Blade Material | Stainless Steel |
|---|---|
| Speed Settings | 3 |
| Dishwasher Safe | Yes |
| Pulse Function | Yes |
| Blade Type | FusionBlade |
| Material | Plastic |
| Frequency | 60 Hz |
| Voltage | 120 Volts |
To Next Page
