CONGRATULATIONS ON YOUR
PURCHASE OF THE BLACK & DECKER
FUSIONBLADE BLENDING SYSTEM!
USING YOUR BLENDER:
1. Make sure your appliance is off
and secure the blender
jar on the base
2. Add ingredients to be
blended into the blender jar.
The order is important!
3. Place the lid securely on
the jar, plug in the blender
and press “ON | OFF”
to power on
4. Press the desired speed
or pre-set 30 second
smoothie button
5. When blended to desired
consistency press
STOP to stop blending
6. Press ON | OFF to turn off
blender, lift the jar off the base
and remove the lid to pour!
*Layout of digital controls
may vary by model
Liquids | Powders | Soft Foods | Hard Foods | Ice
To Next Page
Loading...
