- Cut food into pieces no larger than 3/4” for use
before blending.
- If ingredients splatter onto the sides of the jar or the
mixture is very thick, turn the appliance off. Remove
the lid and use a rubber spatula to scrape down the
sides of the jar and to redistribute the food, pushing
food toward the blades. Replace the lid and
continue blending.
- When using the PULSE function, use short bursts. Allow
the blades to stop rotating between pulses. Do not use
PULSE for more than 30 seconds continuously.
- It is helpful to begin the blending process on the lowest
speed and then increase to a higher speed, if necessary.
- Never operate the blender without the lid.
- When blending hot ingredients, always let them cool at
least 5 minutes before blending. Begin blending on the
lowest speed with the lid cap off to allow steam to
escape. Cover lid cap hole with towel or hot pad.
TIPS
To Next Page