Need help?Do you have a question about the Black & Decker GL546 and is the answer not in the manual?
General| Brand | Black & Decker |
|---|---|
| Model | GL546 |
| Category | Trimmer |
| Language | English |
Ensure children stay away, wear protective clothing/gear, maintain balance, and stay alert.
Follow safe practices for operation, maintenance, cord handling, and repairs.
Keep the work area clean, well lit, and avoid wet or flammable conditions.
Attach the guard (11) to the tool using the screw (12) as shown in figure A.
Connect the extension cable to the power inlet and plug into a mains outlet.
Adjust the trimmer head position for trimming (Fig. B) or edging (Fig. C).
Hold the tool correctly, swing side to side, take small cuts, and avoid hard objects.
Achieve best results on edges >50mm. Do not use for creating edges; use an edging spade.
Replace empty spool with a new one, ensuring lines protrude correctly.
Wind new cutting line neatly onto an empty spool in layers, following the arrow direction.
Check spool housing rotation and cutting line protrusion. Clean if necessary.
Troubleshoot issues with the automatic line feed by checking spool seating and line protrusion.
Address spool jamming by cleaning the spool housing and ensuring proper alignment.
To Next Page