EasyManua.ls Logo

Black & Decker GL8033 - User Manual

Black & Decker GL8033
80 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
www.blackanddecker.eu
GL7033
GL8033
GL9035

Table of Contents

Other manuals for Black & Decker GL8033

Preview: User Manual
User Manual88 pages
Preview: Manual
Manual88 pages

Questions and Answers

  • H
    Holly MillerAug 6, 2025
    What to do if the automatic line feed on my Black & Decker Trimmer isn't working?
    • H
      Holly MooreAug 6, 2025
      If the automatic line feed isn't working, try these steps: First, keep the tabs depressed and remove the spool cover from the housing. Next, pull the cutting line until it protrudes 11 cm from the housing; if there's not enough line, install a new spool. Align the tabs on the spool cover with the cut outs in the housing and push the cover onto the housing until it snaps securely into place. If the cutting line protrudes beyond the trimming blade, cut it off so that it just reaches the blade. Clean the spool cover and housing carefully. Remove the spool and check if the lever can move freely. Finally, remove the spool, unwind the cutting line, wind it on neatly again, and replace the spool.
  • A
    April SawyerAug 21, 2025
    Why is my Black & Decker GL8033 running slowly?
    • C
      charlessotoAug 21, 2025
      If your Black & Decker Trimmer is running slowly, check that the spool housing can rotate freely and carefully clean it if necessary. Also, check that the cutting line does not protrude more than 11 cm from the spool housing. If it does, cut it off so that it just reaches the line trimming blade.

Summary

Intended Use

Safety Instructions

Safety of Others

Guidelines for ensuring the safety of people around the appliance.

Residual Risks

Identifies potential risks even with safety measures in place.

After Use

Instructions for storing the appliance safely after use.

Inspection and Repairs

Procedures for checking and repairing the appliance.

Additional Safety Instructions for Grass Trimmers

Safety advice tailored to the operation of grass trimmers.

Labels on Appliance

Explanation of warning symbols found on the appliance.

Electrical Safety

Safety precautions related to the electrical aspects of the appliance.

Features

Assembly

Fitting the Guard (Fig. A & B)

Steps for attaching the safety guard to the tool for operation.

Attaching the Secondary Handle (Fig. C)

Instructions for connecting the secondary handle for better control.

Adjusting the Position of the Secondary Handle (Fig. D)

How to adjust the secondary handle for optimal user comfort.

Adjusting the Height of the Tool (Fig. E & F)

Guide to adjusting the telescopic handle for user height and comfort.

Releasing the Cutting Line

How to prepare the cutting line for initial use from the spool.

Storing the Spool Not in Use (Fig. G)

Method for storing an unused cutting line spool on the tool.

Connecting the Tool to the Mains (Fig. H)

Steps for safely connecting the appliance to the power supply.

Use

Setting the Tool to Trimming or Edging Mode (Fig. I & J)

How to switch between trimming and edging functions for different tasks.

Switching On and Off

Instructions for operating the on/off switch and trigger lever.

Hints for Optimum Use

Tips for achieving the best cutting results and efficient operation.

Fitting a New Spool of Cutting Line (Fig. M & N)

Procedure for replacing the cutting line spool with a new one.

Fitting a New Piece of Heavy Duty Cutting Line (Fig. O & P)

How to install heavy duty cutting line for tougher jobs.

Mains Plug Replacement (U.K. & Ireland Only)

Troubleshooting

Tool Runs Slowly

Solutions for when the tool operates at reduced speed or power.

Automatic Line Feed Does Not Work

Troubleshooting steps for the automatic line feed system issues.

Protecting the Environment

Technical Data

EC Declaration of Conformity

Guarantee

Black & Decker GL8033 Specifications

General IconGeneral
Power source-
Product colorBlack, Orange
Rotational speed7000 RPM
Line length supplied10 m
Cutting diameter (max)330 mm
Weight and Dimensions IconWeight and Dimensions
Weight3200 g

Related product manuals