Need help?Do you have a question about the Black & Decker GR298 and is the answer not in the manual?
General| Brand | Black & Decker |
|---|---|
| Model | GR298 |
| Category | Lawn Mower |
| Language | English |
Key safety precautions to reduce risk of fire, electric shock, and personal injury.
Read the manual carefully before operating, know how to switch off, and retain for future reference.
Ensure you know how to switch off in an emergency and retain the manual.
Familiarize with controls, do not allow untrained persons or children to operate.
Wear appropriate footwear, trousers, safety glasses, and hearing protection.
Operate with guards, in daylight, avoid rain/damp, work on slopes carefully, keep clear of blade.
Check for damaged parts, misalignment, breakage, guards, and switches for proper operation.
Check cable for damage, replace if necessary, inspect extension cables periodically.
Appliance is double insulated; ensure power supply matches rating plate voltage.
Electric safety can be improved by using a high-sensitivity 30 mA residual current device (RCD).
Use approved outdoor cables, suitable for power input, inspect for damage, unwind reels completely.
Lists numbered components of the mower: switch, handle, bag, wheels, motor cover.
Ensure the appliance is switched off and unplugged before assembly.
Fit lower handle parts to upper handle using screws, washers, and nuts.
Insert lower handle ends into mower, press down, and secure with screws.
Fix the mains cable using cable restraints to the lower and upper handles.
Let the appliance work at its own pace; do not overload.
Height of cut is adjusted by changing wheel positions.
Disconnect power and wait for blade stop before making adjustments.
Instructions for switching the mower on and off safely.
Recommended mowing path to avoid cable and achieve results.
Empty the grass bag when loose grass scatters; never use without the bag.
For grass over 10 cm, make two cuts: first at max height, then lower.
For best results, only mow dry grass.
Keep unit clean and dry; clean ventilation slots; use scraper for grass/dirt.
Use mild soap and damp cloth; avoid liquids inside or abrasive cleaners.
Regularly remove grass and dirt from the blade.
Examine blade condition seasonally; sharpen or replace if blunt or damaged.
Instructions on how to replace the blade, including part numbers.
Disconnect power and wait for blade stop before proceeding with replacement.
Follow instructions if appliance malfunctions; contact repair agent if problem persists.
Remove the plug from the socket before troubleshooting.
Check for obstructions around the blade.
Check power cable connections and mains fuses.
Dispose of old plug, connect leads to live/neutral terminals.
Do not connect to the earth terminal; follow fitting instructions.
Facility for recycling products at end of life via authorised repair agents.
Check nearest agent location via local office or Internet.
To Next Page