Black & Decker HGS100T

Questions and Answers

L
lesliejohnsonJul 29, 2025
Why is my Black & Decker HGS100T Steam Cleaner not producing enough steam?
- Z
  zwestJul 29, 2025
  There might be several reasons why your Black & Decker Steam Cleaner isn't producing enough steam. First, ensure the steamer has preheated for at least 60 seconds. Also, check that the water tank is filled to the Max level. Finally, if the steamer hasn't been used in weeks, an air pocket may be blocking the steam; push the steam reset button on the bottom of the unit to push air through the pump.
M
Matthew Williams Jr.Aug 5, 2025
How to fix Black & Decker Steam Cleaner that is plugged in but not heating?
- N
  nicole49Aug 5, 2025
  If your Black & Decker Steam Cleaner is plugged in but not heating, it indicates a power supply issue. Check that the plug is properly inserted into the outlet, or try plugging the steamer into a different outlet.
J
Jared HarperAug 12, 2025
What to do if my Black & Decker HGS100T is leaking?
- S
  Stephen ShannonAug 13, 2025
  If your Black & Decker Steam Cleaner is leaking, it could be due to a few reasons. Ensure the steamer has heated for about 45 seconds. If condensation has built up, gently wipe the ironing plate with a soft, damp cloth. Also, make sure the water tank isn't running low; fill it to the Max level marker.
C
Chelsea RichardsonAug 20, 2025
Why is discolored water coming from my Black & Decker HGS100T Steam Cleaner?
- T
  Tracy KellyAug 20, 2025
  Discolored water from your Black & Decker Steam Cleaner can be due to residue buildup in the water tank or on the ironing plate. Empty the water tank after each use and only use distilled, filtered, or purified water. Also, avoid perfumed or scented additives and clean the steamer ironing plate after using starch. Regularly clean the steamer and refrain from using perfumed or scented additives.