EasyManua.ls Logo

Black & Decker HP180K - Maintenance; Service Information

Black & Decker HP180K
24 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAINTENANCE
Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the
tool into a liquid.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (other than those listed
in this manual) should be performed by authorized service centers or other qualified service personnel, always using
identical replacement parts.
ACCESSORIES
Recommended accessories for use with your tool are available from your local dealer or authorized service center.
WARNING: The use of any accessory not recommended for use with this tool could be hazardous.
PROTECTING THE ENVIRONMENT
Separate collection.
This product must not be disposed of with normal household waste.
Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dis-
pose of it with household waste. Make this product available for separate collection.
Separate collection of used products and packaging allows materials to be recycled and used again.
Re-use of recycled materials helps prevent environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.
SERVICE INFORMATION
Black & Decker offers a full network of company-owned and authorized service locations. All Black & Decker Service
Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. Whether you
need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you.
SPECIFICATIONS HP120K HP144K HP180K
VOLTAGE V
DC
12 14.4 18
No-load speed min
-1
0-400/0-1,200 0-400/0-1,200 0-500/0-1,600
Max. torque Nm 20.2 22.1 29.4
Chuck capacity mm 10 13 13
Max. drilling capacity
in steel/wood/masonry mm 10/25/10 13/30/12 13/35/15
Battery cat. no. A1212 A1714 A1718
Capacity Ah 1.2 1.7 1.7
Weight (without battery) kg 1.2 1.4 1.5
CHARGER
Input voltage V
AC
AR 220V ~ 50Hz
B2 220V ~ 50-60Hz
B3 120V ~ 60Hz
BR 127V/220V ~ 60Hz
Approx. charging time hrs 3
23
ENGLISH

Other manuals for Black & Decker HP180K

Related product manuals