Why is my Black & Decker Drill battery not charging?
If your Black & Decker Drill battery pack isn't charging, ensure the charger is properly plugged into a working outlet. The surrounding air temperature may also be a factor; move the charger and battery pack to an environment where the temperature is above 40 degrees F (4.5°C) or below 105 degrees F (40.5°C).
Why is my Black & Decker Power Tool battery pack not charging?
Your Black & Decker Power Tool battery pack may not be charging for a couple of reasons. First, make sure the charger is properly plugged into a working outlet. Second, the surrounding air temperature might be too hot or too cold. Move the charger and battery pack to an area where the temperature is above 40 degrees F (4.5ºC) or below 105 degrees F (40.5ºC).
Read all warnings and instructions; failure to follow may result in shock, fire, or injury.
Instructions for charging the battery before first use and during operation.
How to operate the trigger for ON/OFF and use the slider for forward/reverse/lock.
Instructions for inserting and tightening drill bits or accessories into the chuck.
Select rotation, operate trigger for speed control, and turn tool on/off.
Table of common problems, their causes, and solutions.
General| Soft grip | Yes |
|---|---|
| Chuck type | Keyless |
| Product design | Pistol grip drill |
| Number of gears | 2 |
| Torque settings | 8 |
| Sound power level | 84 dB |
| Chuck capacity (max) | 10 mm |
| Chuck capacity (min) | 1 mm |
| Sound pressure level | 73 dB |
| Idle speed (1st gear) | 400 RPM |
| Drilling diameter in wood (max) | 20 mm |
| Maximum torque (hard applications) | 8 N⋅m |
| Maximum torque (soft applications) | 12 N⋅m |
| Vibration emission | 2.5 m/s² |
| Product color | Black, Orange |
| Power source | Battery |
| Charging time | 180 min |
| Battery voltage | 7.2 V |
| Battery capacity | 1.5 Ah |
| Battery technology | Lithium |
| Carrying case | No |
| Quantity per pack | 1 pc(s) |
To Next Page
