Black & Decker BDCDD120C User Manual

INSTRUCTION MANUAL
20V MAX* CORDLESS DRILL
Thank you for choosing BLACK+DECKER!
PLEASE READ BEFORE RETURNING THIS PRODUCT FOR
ANY REASON.
If you have a question or experience a problem with your BLACK+DECKER
purchase, go to http://www.blackanddecker.com/instantanswers
If you can’t find the answer or do not have access to the Internet, call
1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. - Fri. to speak with an agent.
Please have the catalog number available when you call.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPANOL EN LA CONTRAPORTADA.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
*Maximum initial battery pack voltage (measured without a workload) is 20 volts. Measured
under a workload, nominal voltage is 18.
CATALOG NUMBER
BDCDD120C
To register your new product, call 1-800-544-6986
or visit www.BlackandDecker.com/NewOwner

Black & Decker BDCDD120C Specifications

General

Voltage	20V
Max Torque	115 in-lbs
Speed	0-650 RPM
Battery Type	Lithium Ion
Clutch Positions	11
Chuck Size	1/2 inch
Power Source	Battery
Length	8.5 in.
Type	Cordless Drill/Driver

Summary

Safety Guidelines and Definitions

General Power Tool Safety Warnings

Read all safety warnings and instructions. Failure to follow warnings may result in electric shock, fire, or serious injury.

Work Area Safety

Electrical Safety

Personal Safety

Power Tool Use and Care

Power Tool Use and Care

Do not force the tool, use the correct tool, and maintain power tools for safe operation.

Battery Tool Use and Care

Recharge only with specified chargers, use designated battery packs, and keep terminals away from metal objects.

Specific Safety Rules

Hold tool by insulated surfaces, use auxiliary handles, secure work, and keep clear of moving parts.

Battery Charger and Pack Safety

Important Safety Instructions for Battery Chargers

Instructions for safe use and handling of battery chargers.

Important Safety Instruction for Battery Packs

Safety precautions for battery packs, including charging and handling.

Charging Procedure

Step-by-step guide for charging battery packs.

Charger Diagnostics

Bad Battery

Hot/Cold Pack Delay

Drill Operation and Maintenance

Safety Warnings and Instructions: Drills

Specific safety precautions when operating drills.

Installing and Removing the Battery Pack from the Tool

Instructions for safely installing and removing battery packs.

Operating Instructions

General guidelines for operating the drill.

Trigger Switch & Reversing Button

Torque Control

Keyless Chuck

Screw Driving

Drilling

Maintenance

Service, Warranty, and Troubleshooting

Service Information

Limited Two-Year Home Use Warranty

Troubleshooting

Common problems and their possible solutions for the tool and battery.