To Next PageTo Next Page
Need help?Do you have a question about the Black & Decker BDCDD12BAFC and is the answer not in the manual?
General| Brand | Black & Decker |
|---|---|
| Model | BDCDD12BAFC |
| Category | Drill |
| Language | English |
Read all safety warnings and instructions to prevent electric shock, fire, and serious injury.
Keep work area clean and lit, avoid explosive atmospheres, and keep children and bystanders away.
Ensure plugs match outlets, avoid contact with earthed surfaces, and protect from rain and wet conditions.
Stay alert, use PPE, prevent unintentional starting, remove wrenches, and dress properly.
Do not force the tool, use the correct tool, and disconnect power before adjustments or storage.
Use auxiliary handles, hold by insulated surfaces, secure workpiece, check for wiring, and avoid hot drill tips.
Do not open, expose to water, store above 40°C, charge between 10-40°C, use specified charger, and dispose properly.
Do not charge damaged batteries, use specified charger, never charge non-rechargeable, replace cords, keep dry, do not open or probe.
Charge battery before first use or when power is low; battery may warm up.
Control ON/OFF by trigger; forward/reverse by slider; center position locks the tool.
Adjust collar for torque settings in screwdriving mode; use drill symbol for drilling.
Engage lock-off button before installing/removing accessories; insert bit and tighten chuck securely.
Apply light pressure, decrease before breakthrough, use wood backing, spade bits, HSS bits, masonry bits, and lubricant.
Use correct bit size, apply lubricant if needed, and hold tool/bit straight with screw.
Check battery pack charge; ensure charger is plugged in; check ambient temperature for battery pack.
Check charger connection, ambient temperature, or if battery pack is depleted or thermal limited.
Allow battery pack to cool down or recharge if depleted; check ambient temperature.
