7
Labels on tool
The following pictograms are shown on the tool:
:
Warning! To reduce the risk of injury, the user must
read the instruction manual.
Electrical safety
#
This tool is double insulated; therefore no earth wire
is required. Always check that the power supply
corresponds to the voltage on the rating plate.
u If the supply cord is damaged, it must be replaced by the
manufacturer or an authorised Black & Decker Service
Centre in order to avoid a hazard.
Features
This tool includes some or all of the following features.
1. On/off switch
2. Dust cassette
3. Base
4. Tip holder
5. Sanding base tip
6. Finger attachment
7. Prole attachment
8. Screw
9. Sanding proles
In addition, this tool is supplied with some or all of the
following accessories:
Accessories
The accessories supplied with your sander depend upon the
model that you have purchased. All the accessories listed
below are available in our Piranha® range. If you require an
accessory that is listed below but is not supplied with your
sander please visit our website at www.blackanddecker.eu.
Item Description
Detail nger.
For small hard-to-reach areas. The detail
nger can be used for light sanding and
for sanding into corners.
Sanding prole attachment.
An attachment to hold the various
proles listed below.
Item Description
Concave curved sanding prole.
For detailed sanding to suit this shape.
Convex curved sanding prole.
For detailed sanding to suit this shape.
Pointed curved sanding prole.
For detailed sanding to suit this shape.
240 grit large detail sanding sheet
with two replacement tips.
For a ne nish for large detail sanding.
120 grit large detail sanding sheet
with two replacement tips.
For a medium nish for large detail
sanding.
60 grit large detail sanding sheet with
two replacement tips.
For a coarse nish for large detail
sanding.
High-gloss large detail nish sheet
(grey) with two replacement tips.
For applying polish.
Cleaning sheet (red) for wood or metal
with two replacement tips.
For cleaning or polishing tasks on wood
or metal.