Need help?Do you have a question about the Black & Decker KA280 and is the answer not in the manual?
General| Power | 220 W |
|---|---|
| Soft grip | Yes |
| Type of sander | Multi sander |
| Number of speeds | 2 |
| Dust extraction port | - |
| Sanding media fixing | Velcro |
| Eccentricity | 1 mm |
| Idle speed (max) | 13000 RPM |
| Oscillating orbit diameter | 2 mm |
| Cable length | 3 m |
| Power source | AC |
| AC input voltage | 230 V |
Weight and Dimensions| Sanding disc diameter | 125 mm |
|---|
Provides critical safety warnings and instructions for operating power tools to prevent injury.
Guidelines for maintaining a safe and well-lit work environment to prevent accidents.
Essential electrical precautions to prevent shock hazards when using power tools.
Personal protective measures and common sense practices for safe tool operation.
Instructions on proper usage, maintenance, and care of power tools to ensure safety.
Guidance on storing power tools safely out of reach of children and untrained users.
Importance of regular maintenance checks for preventing accidents and ensuring proper operation.
Instructions for using the tool and accessories according to working conditions and intended operations.
Recommends servicing by qualified personnel using identical replacement parts for safety.
Specific safety warnings related to sanders, including gripping, workpiece support, and dust hazards.
Safety considerations for bystanders, especially children, during tool operation.
Information on declared vibration emission values and actual use exposure.
Explains pictograms on the tool, emphasizing reading the manual.
Notes that the tool is double insulated, requiring no earth wire.
Instructions for detaching and fitting various sanding bases onto the tool.
Procedure for attaching sanding sheets to different sanding bases.
Details on using and attaching the large detail sanding base for various applications.
Procedure for reversing or replacing worn sanding base tips and holders.
Steps to install the finger attachment for fine detail sanding.
Guide for fitting the profile attachment for contour sanding.
Instructions on how to attach and detach sanding profiles to the attachment.
How to align and press a sanding sheet onto a sanding profile.
Steps for fitting the louvre attachment for working in crevices.
Attaching an extra hook and loop fastener for dual-sided sanding.
Tips for operating the tool comfortably and safely, avoiding overload and covering vents.
Instructions on how to operate the power switch to turn the tool on and off.
Explains the Autoselect dial for selecting sanding applications and recommended settings.
Step-by-step guide on how to empty and refit the dust canister.
Instructions for cleaning the reusable dust canister filter, with cautions against certain methods.
To Next Page
