Need help?Do you have a question about the Black & Decker KR504RE and is the answer not in the manual?
General| Chuck type | Key |
|---|---|
| Hammer drilling | - |
| Adjustable speed | Yes |
| Drilling diameter in wood (max) | 20 mm |
| Drilling diameter in steel (max) | 13 mm |
| Type | Drill |
| Output power | 500 W |
| Power source | AC |
| AC input voltage | 230 V |
| Quantity per pack | 1 pc(s) |
Maintain a clean, well-lit workspace, keep children away, and avoid explosive atmospheres.
Use correct plugs, avoid earthed surfaces, keep away from water, and use suitable outdoor cords.
Stay alert, use PPE, prevent accidental starts, remove tools, maintain balance, dress properly, use dust extraction.
Do not force the tool, use the correct tool, ensure switch function, and disconnect power before adjustments.
Supervise users with reduced capabilities; ensure children do not play with the appliance.
Declared vibration values per EN 60745; actual use may vary. Assess exposure based on usage conditions.
Pictograms on the tool indicate warnings. Read the manual to reduce injury risk.
Double insulated tool requires no earth wire. Verify power supply and replace damaged cords.
Attach and secure the side handle and depth stop to the tool as shown in figures A & F.
Insert drill bit into keyless or keyed chuck and tighten securely.
Instructions for removing and refitting the chuck using screws and tools.
Use the forward/reverse button to select rotation direction; never change while the motor is running.
Set the drilling mode selector for masonry (T) or other materials ( ).
Slacken the side handle, set the depth stop, and tighten the handle.
Use the variable speed switch for speed control; use the lock-on button for continuous operation.
Instructions for safely fitting a new mains plug, including wiring and fuse recommendations.
Declaration of compliance with relevant directives and standards for the listed product models.
Details the 24-month guarantee, terms, and conditions for Black & Decker products.
To Next Page
