Need help?Do you have a question about the Black & Decker KR50RE and is the answer not in the manual?
General| Power | 500W |
|---|---|
| Chuck Capacity | 13mm |
| No Load Speed | 0-2800 RPM |
| Impact Rate | 47600 BPM |
| Drilling Capacity (Steel) | 13mm |
| Drilling Capacity (Wood) | 20mm |
| Drilling Capacity (Masonry) | 13mm |
| Reverse | Yes |
| Variable Speed | Yes |
| Lock-on Switch | Yes |
| Voltage | 230V |
| Weight | 1.8kg |
Read all safety warnings and instructions. Failure to follow may result in electric shock, fire, or serious injury.
Keep work area clean and well lit. Do not operate in explosive atmospheres. Keep children and bystanders away.
Match plugs to outlets. Avoid body contact with earthed surfaces. Do not expose to rain or wet conditions.
Stay alert, use PPE, prevent unintentional starting, remove keys, do not overreach, dress properly.
Do not force the tool, use if switch works, disconnect before adjustments, store properly, keep tools sharp.
Specific warnings for drills and impact drills, including hearing protection and auxiliary handles.
Tool not for persons with reduced capabilities unless supervised. Children should be supervised.
Declared vibration emission values measured per EN 60745. Actual use may differ.
Pictograms shown on the tool. User must read manual to reduce injury risk.
Tool is double insulated. Check power supply matches voltage on rating plate.
Lists numbered features of the tool: variable speed switch, lock-on button, forward/reverse button, mode selector, chuck, depth stop, side handle.
Instructions for fitting the side handle and depth stop. Ensure tool is off and unplugged.
Guide for fitting drill bits into keyless or keyed chucks.
Steps for removing and refitting the chuck using a screwdriver and Allen key.
Identifies risks like touching moving parts, changing accessories, prolonged use, and hearing impairment.
Advice on not overloading the tool and checking for wiring before drilling.
Instructions for setting forward/reverse rotation using the button.
Guidance on setting the drilling mode selector for masonry or other materials.
How to set the depth stop for desired drilling depth.
Details on using the variable speed switch and lock-on button.
Information on using Black & Decker and Piranha accessories for optimal performance.
Guidance on regular cleaning of ventilation slots and motor housing.
Instructions for safely fitting a new mains plug, including wiring.
Guidelines for separate collection and recycling of used products.
Specifications including input voltage, power input, no load speed, drilling capacity, and weight.
Statement of compliance with relevant directives and standards.
Details of the product guarantee, coverage, and claim process.
To Next Page
