Need help?Do you have a question about the Black & Decker KR1102K and is the answer not in the manual?
General| Chuck type | Keyless |
|---|---|
| Adjustable speed | Yes |
| Torque (max) | 74 N⋅m |
| Number of gears | 2 |
| Screw diameter (max) | 13 mm |
| Idle speed (1st gear) | 1100 RPM |
| Idle speed (2nd gear) | 3200 RPM |
| Drilling diameter in wood (max) | 50 mm |
| Drilling diameter in steel (max) | 16 mm |
| Drilling diameter in concrete (max) | 20 mm |
| Cable length | 4 m |
| Output power | 1100 W |
| Power source | AC |
| AC input voltage | 230 V |
Read all warnings and instructions to prevent electric shock, fire, or serious injury.
Maintain a clean, well-lit area, avoid flammable atmospheres, and keep bystanders clear.
Use correct plugs, avoid grounded surfaces, and protect from moisture to prevent shock.
Stay alert, wear protective gear, prevent unintentional starting, maintain balance, and dress properly.
Use the correct tool, ensure it functions properly, and disconnect power before adjustments.
Secure workpiece, check wiring, avoid hot bits, and keep children supervised during use.
Steps to attach and tighten the side handle and insert the depth stop for improved control.
Instructions for fitting drill bits into chucks and the procedure for removing and refitting the chuck.
Guidance on selecting rotation, drilling mode, gear, depth, and using the variable speed switch.
To Next Page