To Next PageTo Next Page
Need help?Do you have a question about the Black & Decker KR700 and is the answer not in the manual?
General| Power | 700 W |
|---|---|
| Chuck Size | 13 mm |
| Drilling Capacity (Steel) | 13 mm |
| Drilling Capacity (Wood) | 25 mm |
| Drilling Capacity (Masonry) | 13 mm |
| Reverse | Yes |
| Variable Speed | Yes |
| Voltage | 230 V |
| Battery Type | N/A (Corded) |
Explains the double insulation feature for electrical safety and user protection.
Instructions for replacing the mains plug for UK, Australia and New Zealand models.
Guidance on using extension cables and disposing of unwanted tools.
Details of the product guarantee for UK, Australia and New Zealand.
Step-by-step guide for fitting and removing drill bits using keyless and keyed chucks.
Instructions on how to safely remove the drill chuck from the spindle.
Guidance on attaching and positioning the auxiliary side handle for better control.
Procedure for adjusting the depth stop to control drilling depth accurately.
Steps for preparing the drill, including fitting accessories and setting controls.
Instructions on how to operate the drill, including switch functions and grip.
Tips for effective use, including proper grip, bit selection, and cooling procedures.
Information on preventing overload and the EC Declaration of Conformity.
