Need help?Do you have a question about the Black & Decker KS2005E and is the answer not in the manual?
General| Power | 520 W |
|---|---|
| Voltage | 230 V |
| Weight | 2.1 kg |
| Dust Blower | Yes |
| Variable Speed | Yes |
| Type | Jigsaw |
| Power Source | Corded |
| Speed | 0-3000 strokes/min |
| Bevel Capacity | 45° |
| No-Load Speed | 0-3000 strokes/min |
Read all warnings and instructions to prevent electric shock, fire, or serious injury. Follow all guidelines.
Keep area clean, avoid explosive atmospheres, and keep children and bystanders away from the operating tool.
Use correct plugs, avoid earthed surfaces, keep away from rain/wet conditions, and do not abuse the power cord.
Stay alert, use PPE, prevent unintentional starting, maintain balance, dress properly, and use dust extraction.
Do not force the tool, check switch function, disconnect before adjustments, store properly, and maintain tools.
Have your power tool serviced by a qualified repair person using only identical replacement parts.
Specific warnings for jigsaws and reciprocating saws, including handling, blade safety, and dust protection.
Ensure children are supervised and that persons with reduced capabilities are instructed or supervised.
Potential risks like touching moving parts, prolonged use, hearing impairment, and dust inhalation hazards.
Details on declared vibration emission values measured according to EN 60745 for exposure assessment.
This tool is double insulated, requiring no earth wire. Always check power supply voltage matches the rating plate.
Lists features like variable speed switch, lock-on button, blade locking lever, support roller, shoe plate, and dust adaptor.
Instructions for fitting the saw blade, ensuring teeth face forward and securing the blade holder and roller.
Procedure to adjust the blade support roller by turning the locking knob to align with the blade's rear.
Steps to connect a dust extraction adaptor and vacuum cleaner hose for dust removal during cutting.
General advice on tool usage: let the tool work at its own pace, do not overload, and ensure the shoe plate is secure.
How to set the shoe plate for bevel angles up to 45° and reset it for straight cuts using the locking knob.
Instructions on operating the variable speed switch and the lock-on button for continuous operation.
Guidance on using a pencil to mark the cutting line and positioning the jigsaw over it for accurate cuts.
Recommendations for speed settings based on material: high for wood, medium for aluminium/PVC, low for other metals.
Tips to minimize splintering on laminates, such as using fine-tooth blades and sawing from the back.
Advice for sawing metal, including using suitable blades, working with thin sheet metal, and applying oil.
Information on the importance of using Black & Decker and Piranha accessories for optimal tool performance.
Instructions for cleaning ventilation slots, motor housing, and lubricating the blade support roller axle.
Procedure for replacing the mains plug, including wiring instructions and recommended fuse rating.
Guidance on proper disposal of the product and its packaging for recycling and environmental protection.
Details input voltage, power input, number of strokes, max depth of cut for various materials, sound pressure and vibration.
Information on the 24-month guarantee, terms and conditions, and how to claim for defective products.
To Next Page