Need help?Do you have a question about the Black & Decker KS500 and is the answer not in the manual?
General| Cable length | 3 m |
|---|---|
| Output power | 400 W |
| Power source | AC |
| AC input voltage | 230 V |
| No-load stroke rate | 3000 spm |
| Cutting depth in wood | 60 mm |
| Cutting depth in aluminum | 10 mm |
| Cutting depth in non-alloyed steel | 5 mm |
| Dust blower | Yes |
| Number of speeds | 1 |
| Bevel capacity (max) | 45 ° |
| Tool-free blade change | No |
Provides general safety warnings and instructions for operating power tools safely.
Guidelines for maintaining a safe and clear work environment to prevent accidents.
Ensures safe electrical practices when using the power tool, including plugs and cords.
Emphasizes staying alert, using PPE, and preventing unintentional starts for operator safety.
Advice on using the correct tool and maintaining it for safe and effective operation.
Specific safety advice and warnings related to jigsaws, including handling and securing workpieces.
Ensures the safety of bystanders, especially children, during tool operation.
Instructions on how to adjust the saw blade support roller for proper blade contact.
Step-by-step guide for installing and removing saw blades, including screw adjustments.
Details on how to use the integrated compartment for storing saw blades.
Explanation of the cut line blower feature for improved visibility during cuts.
Tips for cutting laminates to minimize splintering and achieve clean edges.
Guidance on sawing metal, including blade selection and lubrication.
To Next Page