This product is for household use only.
• Remove all packing material and any stickers from the product.
• Wash all removable parts as instructed in section of
this manual.
• Select a level, dry countertop where the appliance is to be used, allowing air
space on all sides to provide proper ventilation for the motor.
The center posts of both bowls are removable:
1. Turn the bowl upside down.
2. Grasp the clear outer tabs and turn the center post
clockwise until the lower tabs are free. Lift the post out .
3. To return to its original position, place center post
into smaller opening in bottom of workbowl and turn
counterclockwise until tabs snap into place.
1. Attach center post to workbowl. Place the workbowl on
the base with handle turned to the right of the locking
mechanism over the unlock symbol .
2. Hold handle and rotate workbowl clockwise toward the
lock symbol until it clicks firmly into place . Be sure
to lock the workbowl in place before attaching the blades
and cover.
1. Place cover over workbowl with the small latch to the right
of the workbowl’s handle .
2. Hold feed chute of workbowl cover and rotate cover
clockwise until cover locks into place.
To Next Page
Loading...
Need help?
General
