6
ENGLISH
Powerfile
™
KA293E/KA293G
CONGRATULATIONS!
You have chosen a Black & Decker tool. Our aim is
to provide quality tools at an affordable price.
We hope that you will enjoy using this tool for
many years.
EC DECLARATION OF CONFORMITY
KA293E/KA293G
Black & Decker declares that these
products conform to:
98/37/EC, 89/336/EEC, 73/23/EEC,
EN 50144, EN 55014, EN 61000
Level of sound pressure, measured according to
EN 50144:
KA293E KA293G
L
pA
(sound pressure) dB(A) 88 88
L
WA
(acoustic power) dB(A) 101 101
Always wear ear protection if the sound
pressure exceeds 85 dB(A).
Hand/arm weighted vibration value according to
EN 50144:
KA293E KA293G
< 2.5 m/s
2
< 2.5 m/s
2
Brian Cooke
Director of Engineering
Spennymoor, County Durham DL16 6JG,
United Kingdom
INTENDED USE
Your Black & Decker Powerfile
™
sander KA293E/
KA293G has been designed for the following
applications:
- sanding, shaping and finishing wood, metal,
plastics and painted surfaces
- removing paint or rust
- cutting tiles
- sanding and finishing ceramics (using a silicon
carbide sanding belt)
This tool is intended for consumer use only.
SAFETY INSTRUCTIONS
Warning symbols
The following symbols are used in this manual:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-
observance of the instructions in this manual.
Denotes risk of electric shock.
Read the manual prior to operation.
Fire hazard.
Know your tool
◆ Warning! When using mains-powered
tools, basic safety precautions,
including the following, should always
be followed to reduce the risk of fire,
electric shock, personal injury and
material damage.
◆ Read all of this manual carefully before
operating the tool.
◆ Before operating the tool, make sure
that you know how to switch the tool off
in an emergency.
◆ Retain this manual for future reference.
To Next Page
Loading...
Need help?
General
