Black & Decker PRO 5.5 User Manual

AIRLESS SPRAYER PRO 5.5 ENGLISH • ESPAÑOL • FRANÇAIS 1
PLEASE READ AND SAVE THIS INSTRUCTION MANUAL
Airless Sprayer
MODEL PRO 5.5
POWER PAINT SPRAYER
WARNING TO REDUCE THE RISK OF INJURY, USER MUST
READ AND UNDERSTAND INSTRUCTION MANUAL.
FOR HOUSEHOLD USE ONLY.
KEEP CHILDREN AWAY FROM WORKING AREA.
For Customer Service Call:
1-800-264-5442 or 763-780-5115,
8 a.m. to 5 p.m. CST.
Made in Taiwan
Rociador sin aire
MODELO PRO 5.5
ROCIADOR DE PINTURA
POTENTE
ADVERTENCIA PARA DISMINUIR LOS RIESGOS DE
LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL MANUAL
DE INSTRUCCIONES.
SÓLO PARA USO DOMÉSTICO.
MANTENGA A LOS NIÑOS LEJOS DEL ÁREA DE TRABAJO.
Para comunicarse con el dpto. de servicio al cliente, llame al:
1-800-264-5442 ó 763-780-5115, 8 a.m. a 5 p.m.
(hora del Centro de EE.UU.).
Hecho en Taiwán
Pulvérisateur sans air
comprimé
MODÈLE PRO 5.5
PULVÉRISATEUR À PEINTURE
ÉLECTRIQUE
AVERTISSEMENT POUR RÉDUIRE LES RISQUES DE
BLESSURE, L’UTILISATEUR DOIT LIRE ET COMPRENDRE LE
MANUEL D’INSTRUCTION.
DESTINÉ À UN USAGE MÉNAGER SEULEMENT.
TENEZ LES ENFANTS ÉLOIGNÉS DE L’AIRE DE TRAVAIL.
Pour le service à la clientèle, appelez au :
1-800-264-5442 ou 763-780-5115, de 8h00 à 17h00,
heure normale du Centre.
Fabriqué à Taïwan

Black & Decker PRO 5.5 Specifications

General

Brand	Black & Decker
Model	PRO 5.5
Category	Paint Sprayer
Language	English

Summary

IMPORTANT SAFEGUARDS

WARNINGS

General safety warnings for operating the sprayer.

PROP 65 WARNING

HAZARD: INJECTION INJURY

Risks associated with high-pressure fluid injection.

HAZARD: EXPLOSION OR FIRE

Risks of explosion or fire from fumes.

SAFETY INSTRUCTIONS AND GUIDELINES

HAZARDOUS VAPORS

GROUNDING INSTRUCTIONS

Importance and method of proper electrical grounding.

EXTENSION CORDS

FAST START QUICK REFERENCE GUIDE

SPRAYING OPERATIONS

CLEAN UP AND LUBRICATION

Step One Clean Up

Step Two Clean Up (Cylinder Housing)

Petroleum Oil Instructions

TROUBLESHOOTING

Motor Issues

Solutions for motor not running or making noise.

Spraying Issues

Solutions for spitting, overspray, or uneven patterns.

Material Flow Issues

Solutions for material not drawing or drawing improperly.

General Operation Issues

Solutions for overheating, leaks, or unit not spraying.