Technical data
PW1450TD
Flow rate
l/min 5,5
l/min 7,1
Pressure
MPa 7
Maximum pressure
MPa
10.5
Power
kW 1,4
Maximum inlet temperature
°C 50
Maximum inlet pressure
MPa
0.7
Gun repulsive force at maximum pressure
N
10.8
Pump oil type
Kg
-
Protection class
-
II/#
Motor insulation
-
Class F
Motor protection
-
IPX5
Voltage
V/Hz
220-240 / 50/60
Weight
kg
4,88
Idle speed with no load
/min
20000
Water supply hose
M
>1
Size
mm
265 X 193 X 449
Guarantee
BLACK+DECKER is condent of the quality of its products
and oers an outstanding guarantee. This guarantee statement
is in addition to and in no way prejudices your
statutory rights.
If a BLACK+DECKER product becomes defective due to
faulty materials, workmanship or lack of conformity, within 24
months from the date of purchase, BLACK+DECKER guaran-
tees to replace defective parts, repair products subjected
to fair wear and tear or replace such products to make sure of
the minimum inconvenience to the customer unless:
u The product has been used for trade, professional or hire
purposes.
u The product has been subjected to misuse or neglect.
u The product has sustained damage through foreign
objects, substances or accidents.
u Repairs have been attempted by persons other than
authorised repair agents or BLACK+DECKER service sta.
To claim on the guarantee, you will need to submit proof of
purchase to the seller or an authorised repair agent.
You can check the location of your nearest authorised repair
agent by contacting your local BLACK+DECKER oce at the
address indicated in this manual. Alternatively, a list of
authorised BLACK+DECKER repair agents and full details of
our aftersales service and contacts are available on the
Internet at: www.2helpU.com
ZHEJIANG ANLU CLEANING MACHINERY CO. LTD.
Factory Add: No.899 Jinqing West Avenue, Jin Qing
Luqiao Area,Taizhou City, Zhejiang Province,China.
Legal Representative: Chen jiming
ENGLISH
13
(original instructions)(original instructions)
To Next Page
Loading...
Need help?
General
