Need help?Do you have a question about the Black & Decker PW1470TD and is the answer not in the manual?
General| Model | PW1470TD |
|---|---|
| Brand | Black & Decker |
| Category | Pressure Washer |
| Power Source | Electric |
| Power | 1400 W |
| Hose Length | 5 m |
| Water Flow | 6.5 L/min |
| Flow Rate | 6.5 L/min |
| Spray Wand Length | 0.5 m |
Prohibits using inflammable liquids, directing water at people/animals, or touching plugs with wet hands.
Details essential safety actions, including protecting electrical parts, proper connections, and operator safety measures.
The manual is an integral part to be read before use and passed to the new owner.
Appliance is delivered partially assembled; lists documentation and main components.
Packaging materials must be recycled or disposed of according to relevant legislation.
Instructions must be followed and safety signs checked for presence and legibility.
Designed for individual cleaning of vehicles, machines, boats, and masonry.
Identifies the intended operator as professional or non-professional.
Prohibits use by unskilled persons, with inflammable liquids, or in explosive atmospheres.
Lists main components like spray nozzle, lance, gun, and accessories.
Details safety devices like the safety valve and safety catch.
Operations must be performed with the appliance disconnected from the mains power supply.
Check voltage, use a grounded supply with a 30mA differential breaker, and proper extension cables.
Use clean water, ensure adequate tap delivery, and place appliance close to the supply.
Turn on water, release safety catch, depress trigger, then start appliance.
Switch off, discharge residual pressure, and engage safety catch.
Use detergent with the nozzle set to " "; ensure proper hose length for intake.
Apply detergent, let it act, then rinse from bottom up; avoid drying and use brushes if needed.
All maintenance not covered should be done by Authorized Service Centre; disconnect plug before work.
Clean nozzle hole with tool C1; inspect and clean intake and detergent filters.
Treat with non-corrosive antifreeze and store in a dry place protected from frost.
Provides solutions for common problems like no working pressure, motor issues, and water leakage.
To Next Page