METAL VISE
JAW COVERS
SWIVEL GRIPS (4)
V-GROOVES
WING SCREWS (2)
(FOR TILT)
Black s Decker ,
WORKMATE®
Bench Top Work Center and Vise
Tilt Top 16" Model 79-020
-DOUBLE VISE JAWS
BENCH CLAMPS
VISE HANDLES (2)
• Can be mounted with included clamps on any work surface up to 21/2" thick.
Suction cups on bottom provide added stability and minimize marring of the work
surface.
• 16" Vise Jaws open up to 51/4" wide. Included Metal Vise Jaw Covers can be used
to protect the vise jaws when gripping objects with shapes or edges that could
damage the jaws.
• Swivel Grips hold irregular shapes and lumber up to 121/2" wide, up to 14"
diagonally.
• Surface can be tilted to 15°, 30° or 45° for use in craft or hobby work.
• V-grooves in vise jaws hold pipe or tubing in horizontal or vertical positions.
• Can be hung on wall or stored under workbench when not in use.
Please read this manual carefully so that you can take full advantage of the versatility
of the WORKMATE®.
OWNER'S MANUAL
To Next Page
Need help?
General
